Effectively Stabilizes Weakened or Fractured
Heat Exchanger Tubes

Available in either Rod type or Cable type configuration

Ideal for any type of heat exchanger tube from high pressure feedwater heaters to surface condensers.

Pop-A-Plug^® Tube Stabilizers are available in any length and are anchored in position using proven Pop-A-Plug System Technology.

• Installs using standard Pop-A-Plug Ram Packages.

• Stabilizer Rods and Anchors are available to fit tubes ranging from .460" to 1.250" I.D. (11.68mm to 31.75mm).

• Stabilizer Anchors are available separately.

• Choose from two standard materials: Stainless Steel or Carbon Steel. Other alloys are available upon request.
  
  
• Choose from two styles: Rod type or cable type.

• Choose from two Stablilizer Tip configurations: Bullet or wedge.

• Quality Assurance System: Manufactured under a Quality Assurance Program certified to ISO 9001 and several U.S. nuclear industry standards including ANSI N45.2, NQA-1, 10CFR 50 Appendix B, and 10CFR 21.

• Ordering Information: When ordering, specify tube OD and wall thickness (tube ID helpful), tube material, tubesheet thickness, maximum operating pressure and temperature, length from the tubesheet face to the first tube support plate beyond the fracture, and axial clearance extending from the tube end outward (ie: length of channel head or distance to any obstruction preventing direct access to the end of the damaged tube). Specifications subject to change.

For a complete catalog, video or additional technical information please contact us by phone, fax or E-mail.